Views: 0 Author: Site Editor Publish Time: 2026-11-24 Origin: Site
A water supply system needs more than pipes and fittings to work properly. Different valves control water flow, isolate sections of the pipeline, prevent backflow and protect equipment from pressure problems.
For importers, distributors and purchasing teams, understanding the role of each valve makes it easier to select suitable products for different projects and customer requirements.
Brass valves are widely used in residential, commercial and general water supply applications because of their corrosion resistance, machinability and practical performance in many plumbing systems.
In this guide, we look at nine common valve types and related components used in water supply systems, explain what each one does and highlight the key points buyers should consider when selecting them.
A brass gate valve is mainly used to start or stop water flow in a pipeline. It operates by moving a gate up or down inside the valve body.
When fully open, the gate moves out of the main flow passage, allowing water to pass through. When fully closed, it blocks the passage and stops the flow.
Gate valves are commonly installed in main water supply lines and branch pipelines where the water needs to be isolated for maintenance or repair.
Key characteristics:
Designed mainly for fully open or fully closed operation
Generally offers relatively low flow resistance when fully open
Available in different sizes and connection types
Not recommended for continuous flow regulation because partially opening the gate can cause vibration and wear
What should buyers check?
Confirm the nominal size, pressure rating, thread standard, material and operating method. Buyers should also consider whether a rising-stem or non-rising-stem design is more suitable for the installation space.
A brass ball valve uses a rotating ball with a hole through its center. Turning the handle rotates the ball, allowing water to pass through or stopping the flow.
A quarter-turn operation usually moves the valve between fully open and fully closed positions, making ball valves convenient for everyday water supply applications.
They are commonly used in water distribution lines, equipment connections and branch pipelines.
Key characteristics:
Quick quarter-turn operation
Easy to operate
Suitable for frequent opening and closing
Available in full-port and reduced-port designs
A full-port ball valve has a flow passage close to the nominal pipe diameter, while a reduced-port design has a smaller opening. This difference affects flow capacity and pressure loss.
What should buyers check?
Consider the valve bore, pressure rating, body material, handle design and connection type. Full-port and reduced-port ball valves should be selected according to the flow requirements of the system.
Ball valves are primarily isolation valves. Standard designs should not be used as precision flow-control valves unless the manufacturer specifically rates them for that purpose.
A brass globe valve controls water flow through the movement of a disc toward or away from a valve seat.
Unlike a gate valve, which is mainly designed for isolation, a globe valve is suitable for adjusting flow. Turning the handwheel changes the opening between the disc and seat, allowing the flow rate to be regulated.
Globe valves are often used where flow adjustment is required rather than simply opening or closing a pipeline.
Key characteristics:
Suitable for flow regulation
Allows more controlled adjustment than a standard gate valve
Provides a clear shutoff function
Generally creates more flow resistance than a fully open gate valve or full-port ball valve
What should buyers check?
Pay attention to the valve size, pressure rating, internal structure and expected flow conditions. If the valve will be used for regular throttling, confirm that its design is suitable for the required operating conditions.
A check valve allows water to flow in one direction and automatically restricts reverse flow. Unlike gate, ball and globe valves, it does not normally require manual operation.
Check valves are commonly installed near pumps, water meters and other points where reverse flow could affect the system.
There are different check valve designs, each with its own closing mechanism.
Spring Check Valve
A spring check valve uses a spring-loaded core. Forward water pressure pushes the core open, while the spring helps return it toward the seat when the flow decreases or reverses.
Vertical spring check valves are available with different internal core materials, such as plastic and brass.
Swing Check Valve
A swing check valve uses a hinged disc. Water pressure pushes the disc open, and the disc moves back toward the seat when forward flow decreases.
Common designs include horizontal swing check valves and Y-pattern swing check valves. Some models are available with soft seals, while others use metal-to-metal sealing.
What should buyers check?
Confirm the flow direction, installation position, pressure rating, sealing design and connection standard. The valve must match the pipeline arrangement and the system's operating conditions.
A strainer is not a shutoff valve, but it is an important component in many water supply systems.
It uses a mesh screen to capture solid particles such as rust, sand and other debris carried by the water. This helps reduce the amount of contamination entering downstream equipment.
Y-type strainers are commonly used in water pipelines because of their compact structure and accessible filter screen.
Key characteristics:
Captures solid particles from the water
Helps protect downstream valves and equipment
Available with different mesh sizes
The filter screen can usually be removed for cleaning
What should buyers check?
The mesh size is particularly important. A finer screen can capture smaller particles but may also create greater flow resistance and require more frequent cleaning.
Buyers should also confirm the strainer size, pressure rating, screen material and cleaning access.
A pressure reducing valve is designed to lower a higher inlet pressure and maintain a lower, more controlled pressure on the downstream side.
In water supply systems, excessive pressure can place additional stress on pipes, fittings, faucets and connected equipment. A pressure reducing valve helps protect downstream components by regulating the outlet pressure.
Unlike a standard gate or ball valve, a pressure reducing valve automatically responds to changes in system conditions within its specified operating range.
Key characteristics:
Reduces higher inlet pressure
Maintains a controlled downstream pressure
Helps protect pipes and water-using equipment
Available in different pressure ranges and connection sizes
What should buyers check?
Confirm the inlet pressure, required outlet pressure, flow range, pressure rating and installation requirements. The valve must be selected according to the actual pressure conditions of the system.
A pressure reducing valve is not the same as a pressure relief valve. One controls downstream pressure, while the other releases excess pressure when a specified limit is reached.
A pressure relief valve is designed to open when system pressure exceeds a specified setting, releasing fluid to reduce pressure.
It is used in applications where excessive pressure could damage equipment or create unsafe operating conditions.
In water systems, pressure relief valves may be installed in equipment circuits or other locations that require overpressure protection.
Key characteristics:
Opens when pressure reaches its specified setting
Releases excess pressure
Helps protect equipment from overpressure
Requires an appropriate discharge arrangement
What should buyers check?
The most important factors include the set pressure, pressure rating, flow capacity, connection size and applicable safety requirements.
A pressure relief valve should not be selected simply by matching the pipe size. Its pressure setting and discharge capacity must suit the protected system.
An angle valve is commonly installed at the connection between a water supply pipe and a plumbing fixture.
It is frequently used under washbasins, behind toilets and at other water connection points where individual equipment needs to be isolated.
Its angled body changes the direction of the water connection, often making it suitable for installations where the supply pipe comes out of a wall.
Key characteristics:
Provides local shutoff for individual fixtures
Helps isolate equipment during maintenance
Available in different handle and connection designs
Compact construction for installation in limited spaces
What should buyers check?
Confirm the inlet and outlet thread sizes, connection type, handle design and installation dimensions. The valve should match both the supply pipe and the connected fixture.
A float valve controls water supply according to the water level in a tank or reservoir.
As the water level rises, the float moves upward and gradually closes the inlet. When the water level drops, the float moves down and opens the valve to allow more water into the tank.
This mechanism helps maintain a set water level without requiring continuous manual operation.
Key characteristics:
Automatically controls water inflow
Helps prevent a tank from overflowing under normal operating conditions
Commonly used in water storage tanks and reservoirs
Available in different float and valve designs
What should buyers check?
Consider the tank size, inlet pressure, required water level, connection size and float mechanism. The valve should be suitable for the water conditions and installation arrangement.
Different valves perform different jobs. Choosing the right one starts with understanding what the pipeline needs to do.
System requirement | Suitable valve or component | Main purpose |
|---|---|---|
Isolate a pipeline | Gate valve | Open or shut off flow |
Quick shutoff | Ball valve | Fast manual operation |
Adjust water flow | Globe valve | Regulate flow |
Prevent reverse flow | Check valve | Restrict backflow |
Remove solid particles | Strainer | Filter pipeline debris |
Reduce downstream pressure | Pressure reducing valve | Control outlet pressure |
Release excessive pressure | Pressure relief valve | Overpressure protection |
Isolate a plumbing fixture | Angle valve | Local shutoff |
Maintain tank water level | Float valve | Automatic water level control |
Before placing an order, buyers should consider several basic requirements:
1. Application
Is the valve being used in a main supply line, a branch pipeline, a pump connection, a water tank or a plumbing fixture? The installation location helps determine the required valve function.
2. Working Pressure and Temperature
Check the system's operating pressure and temperature, not just the nominal pressure rating printed on the product. The selected valve must be suitable for the actual conditions.
3. Connection Standard
BSP and NPT threads are commonly used in different markets. Buyers should confirm the exact thread type and size before ordering. BSPP and BSPT should also be distinguished when specifying BSP connections.
4. Material Requirements
Brass is widely used for water supply valves, but different brass grades and other materials may be required depending on the application and local regulations. Buyers should confirm the material specification rather than relying only on the general description of a product as brass.
5. Operation and Maintenance
Consider how frequently the valve will be operated, whether it needs to be adjusted, and whether internal components such as filter screens require regular cleaning.
SHUANGLIN VALVE is based in Yuhuan, Zhejiang, China, and focuses on brass valves for water supply and related applications.
Our main brass valve products include gate valves, ball valves, globe valves and check valves. We also supply related products such as strainers, angle valves and other water-system components through our product range.
We work with importers, distributors and OEM customers on standard products and customized requirements.
For buyers sourcing multiple valve types, we can help confirm product specifications, materials, thread standards and available configurations according to their requirements.
If you are looking for a brass valve supplier for your market, send us your product list, drawings or technical requirements. Our team can help you identify suitable products for your water supply applications.