| Availability: | |
|---|---|
| Quantity: | |
SL-2115
SHUANGLIN
Balancing water flow across multiple branches is an important part of maintaining a properly operating heating or water distribution system. When each branch requires a specific setting, technicians need a valve that allows controlled adjustment and makes the selected position easy to identify later.
The SHUANGLIN SL-2115 brass regulating valve features a numbered adjustment dial from 0 to 5, providing a visible reference for presetting and restoring valve positions during system commissioning and maintenance.
Made from Brass 59-1, this regulating valve is available in sizes from DN15 to DN50. It is designed for compatible water-based heating, chilled water, and hydronic balancing applications where adjustable flow restriction is required.
Unlike a conventional shut-off valve, the SL-2115 is intended to help set and maintain a selected flow restriction. Its numbered dial makes the adjustment position easier to record, helping technicians return to a previous setting without starting the adjustment process from scratch.
The adjustment cap features a numbered scale from 0 to 5, aligned with a fixed reference mark on the valve body. As the internal orifice is adjusted, the dial indicates the selected position.
A setting of 0 represents the closed position, while progressively higher numbers correspond to more open settings. The scale provides a practical reference for recording valve positions during commissioning and returning to them during later maintenance.
The numbered position is not a direct flow-rate measurement. Actual flow depends on the valve setting, pressure differential, and the characteristics of the connected system.
The valve regulates flow by changing the position of an internal adjustable orifice. This allows technicians to restrict flow through an individual branch when balancing a multi-branch water system.
It can be considered for installations where different branches need different preset flow conditions, rather than simple fully open or fully closed operation.
The SL-2115 uses Brass 59-1 construction for compatible water piping applications. The material offers a practical option for plumbing and hydronic systems, subject to the water quality and operating conditions.
For projects with specific alloy composition, lead-content limits, or drinking-water compliance requirements, buyers should request the relevant material documentation before ordering.
A flow direction arrow is marked on the valve body to indicate the intended installation orientation. Following this marking helps ensure that the valve is installed according to its design.
Before commissioning, check the arrow against the actual direction of flow and follow the manufacturer's installation instructions.
The SL-2115 is available in six nominal sizes, from DN15 to DN50. This range supports different branch pipe dimensions in compatible heating and water distribution systems.
Selecting the correct size requires checking the pipeline dimensions, connection standard, and required flow conditions rather than relying on nominal diameter alone.
Parameter | Specification |
|---|---|
Product Name | Brass Flow Regulating Valve |
Model | SL-2115 |
Brand | SHUANGLIN |
Valve Type | Brass Regulating Valve |
Valve Body Material | Brass 59-1 |
Adjustment Dial | Numbered scale, 0–5 |
Available Sizes | 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" |
Nominal Diameter | DN15, DN20, DN25, DN32, DN40, DN50 |
Nominal Pressure | ≤ 1.6 MPa |
Working Medium | Water |
Working Temperature | -10°C to 120°C |
Main Function | Preset flow restriction and water system balancing |
The SL-2115 can be considered for water systems where flow needs to be adjusted during commissioning and the selected setting should remain easy to identify during future maintenance.
Typical applications include:
In multi-branch heating systems, individual branches may require different flow settings to help distribute water according to the system design. A regulating valve provides a means of adjusting and recording these settings during commissioning.
Compatible underfloor heating systems may require flow balancing between different circuits or branches. The SL-2115 can be evaluated where a manual regulating valve is appropriate for the system design.
For projects requiring integrated manifold-based balancing or dedicated underfloor heating controls, explore SHUANGLIN's underfloor heating control products.
In suitable chilled water systems, regulating valves can help adjust branch flow during commissioning. The valve's material, temperature range, pressure limits, and flow characteristics should be checked against the system requirements.
Commercial buildings often have multiple water circuits that require documented settings during installation and maintenance. The numbered dial provides a visible reference for technicians managing these adjustments.
When an existing system requires rebalancing, a recorded dial position can help technicians restore a previous setting. Actual flow should still be verified using appropriate commissioning methods when required.
The SL-2115 is specified for water as its working medium. For glycol mixtures, chemical additives, or other fluids, consult SHUANGLIN to confirm compatibility before use.
The numbered dial is intended to make valve positioning easier to record and repeat. It should be used as part of a proper commissioning process rather than as a substitute for flow measurement.
Step 1: Check the system requirements.
Determine the target flow conditions for each branch based on the system design or balancing plan.
Step 2: Install the valve in the correct direction.
Follow the flow direction arrow on the valve body and confirm that the connection arrangement matches the pipeline.
Step 3: Adjust the valve to the required position.
Turn the adjustment mechanism to establish the intended restriction. The 0–5 scale provides a reference for the selected position, with higher numbers generally corresponding to a more open setting.
Step 4: Verify the actual flow where necessary.
The same dial setting may not produce the same flow in different systems because pressure differential and other hydraulic conditions vary. Use suitable commissioning instruments and procedures when a target flow rate must be achieved.
Step 5: Record the final setting.
Document the dial position for each valve during commissioning. This record can help maintenance personnel restore the previous setting after inspection or other work.
Step 6: Avoid unnecessary adjustment after balancing.
Once the system has been commissioned, leave the valve at its documented setting unless system requirements change or maintenance work calls for readjustment.
When selecting a regulating valve, buyers should consider the required flow function, pipeline size, operating conditions, and whether the setting needs additional protection.
A regulating valve is suitable when a branch needs an adjustable flow restriction. If the main requirement is simply to open or close a pipeline, a conventional gate valve or ball valve may be more appropriate.
The SL-2115 covers DN15–DN50. Confirm the nominal diameter, actual connection dimensions, and connection standard before ordering.
The listed nominal pressure is up to 1.6 MPa, and the working temperature range is -10°C to 120°C. Verify that the selected valve is suitable for the system's actual operating conditions.
The numbered dial makes the setting easy to identify and record. This is useful when technicians need a visible reference during commissioning or maintenance.
If the adjustment must be protected from unauthorized changes, a magnetic locking model may be a better option.
The dial scale provides a position reference, but it does not establish a specific flow rate by itself. If the project requires a defined flow rate, ask the supplier for available flow characteristics or sizing data and verify the final setting during commissioning.
Different projects may require different levels of adjustment access and flow-setting protection.
Magnetic Locking Regulating Valve: Designed for applications where a preset flow adjustment needs to be protected by a magnetic locking cap. This is an alternative when preventing unauthorized changes is more important than having a visible numbered dial.
Brass Globe Valve, Flow-Regulating, DN15–DN50: A related globe valve for applications requiring manual flow adjustment rather than a numbered preset reference.
Brass Globe Valve, DN15–DN50: An alternative to consider when selecting a brass globe valve for compatible water piping.
SHUANGLIN Globe Valve Range: Explore the wider product range to compare valve designs and application requirements.
These products serve different functions. Confirm the actual specifications, flow characteristics, and installation requirements before substituting one model for another.
For valve distributors, HVAC contractors, plumbing suppliers, and equipment manufacturers, sourcing a regulating valve involves more than selecting a nominal diameter. Consistent product specifications, material verification, and clear technical support also matter.
SHUANGLIN's manufacturing capabilities cover brass and bronze valves, along with related plumbing and HVAC components. The company describes its quality-control processes as including incoming material verification, in-process inspection, and finished-valve tightness testing.
For the SL-2115, buyers should confirm the specific model's connection dimensions, flow characteristics, and material requirements rather than assume all regulating valves have identical specifications.
When requesting a quotation, provide:
Required nominal sizes and quantities
Pipeline connection standard
Working pressure and temperature
Target flow requirements, if applicable
Material or drinking-water compliance requirements
OEM/ODM and packaging requirements
This information helps the supplier determine whether the valve matches the intended water system.
The dial indicates the position of the internal adjustable orifice. A setting of 0 represents closed, while higher numbers generally correspond to more open positions. The scale is a positional reference, not a direct flow-rate measurement.
It can be considered for compatible water-based heating circuits where a manual regulating valve is appropriate. Confirm the system design, required flow conditions, and installation arrangement before selecting the valve.
The SL-2115 is intended to support preset adjustment during commissioning and subsequent restoration of documented settings. Frequent changes can affect the intended system balance, so adjustments should follow the system's commissioning or maintenance requirements.
The SL-2115 has a visible numbered adjustment dial for recording and repeating settings. The magnetic locking version uses a magnetic locking cap to restrict access to the adjustment mechanism, helping protect a commissioned setting from unauthorized changes.
No. The dial shows the valve's adjustment position. Actual flow also depends on the pressure differential and hydraulic characteristics of the system. Consult the supplier for available flow data and verify flow using suitable commissioning methods when required.
The listed sizes are 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2", corresponding to DN15 through DN50.
Confirm the required size, connection standard, operating pressure and temperature, flow requirements, and any applicable material or certification requirements. If the valve will be installed in a system requiring a specific flow rate, ask for relevant sizing or flow-characteristic information.
Looking for a brass regulating valve with a numbered adjustment dial for a water-based heating or distribution system?
Contact SHUANGLIN to confirm the SL-2115 specifications, available sizes, connection details, and customization options. Providing your system requirements and target flow conditions will help determine whether this valve is suitable for your application.